2 Flute - Fractional - Extra Long Reach & Shank - Square End - AlTin Coated
Cutter Diameter Tolerance: +000/-.002"
Neck diameters are reduced for clearance.
Center Cutting - Micro Grain Carbide
Made in USA
Neck diameters are reduced for clearance.
Center Cutting - Micro Grain Carbide
Made in USA
| Tool Number |
Angle Per Side |
T Tip Diameter |
Ramp Angle | Incl'd Angle | Size | Max Tip Diameter | Thread Size | R Corner Radius |
Pitch | D1 Cutter Diameter |
D2 Shank Diameter |
D3 Neck Diameter |
L1 Overall Length |
L2 Length of Cut |
L3 Reach from Tip |
L4 Neck Length |
D1 Decimal Diameter |
N Neck Diameter |
L Neck Length |
R Corner Radius Amount |
Angle Per Side |
Tip Diameter |
Max Back Chamfer |
F Non Cut Flat |
L2 Cutter Width |
D1 Pilot Diameter |
D Head Diameter |
Rad From Tip |
Depth of Cut |
Slot Depth |
Top Rad |
Bottom Rad |
Diameter Over Rad |
L3 Split Length |
D1 Drill Diameter |
Ramp Angle |
Price | Stock | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 55125 | 1/8" | 1/8" | 3" | 3/4" | 1-1/2" | $43.70 | 16 | ||||||||||||||||||||||||||||||||
| 55187 | 3/16" | 3/16" | 4" | 1" | 2-5/8" | $46.30 | 5 | ||||||||||||||||||||||||||||||||
| 55250 | 1/4" | 1/4" | 6" | 1-1/2" | 4-1/4" | $64.40 | 13 | ||||||||||||||||||||||||||||||||
| 55312 | 5/16" | 5/16" | 6" | 1-1/2" | 4-1/4" | $81.40 | 3 | ||||||||||||||||||||||||||||||||
| 55375 | 3/8" | 3/8" | 6" | 1-1/2" | 4-3/8" | $93.80 | 3 | ||||||||||||||||||||||||||||||||
| 55500 | 1/2" | 1/2" | 6" | 1-1/2" | 4" | $124.05 | 3 | ||||||||||||||||||||||||||||||||
| 55125S | 1/8" | 1/8" | 3" | 3/4" | 1-1/4" | $42.55 | 11 | ||||||||||||||||||||||||||||||||
| 55125L | 1/8" | 1/8" | 3" | 1" | 1-5/8" | $44.85 | 2 | ||||||||||||||||||||||||||||||||
| 55187S | 3/16" | 3/16" | 2-1/2" | 3/4" | 1-3/8" | $42.30 | 6 | ||||||||||||||||||||||||||||||||
| 55250S | 1/4" | 1/4" | 4" | 1" | 2-5/8" | $52.65 | 6 |